FLIR - MUVE C360

The Future of Gas Monitoring is Unmanned

The FLIR MUVE™C360 is a multi-gas detector completely integrated with an unmanned aerial system (UAS) to provide real-time continuous monitoring of chemical hazards while on the move. The sensor block boasts 8-channels, which includes a photoionization detector (PID), Lower Explosive Limit (LEL) detector, and six other sensors. The integrated snorkel is designed to negate the effects of rotor wash, extending past the propellers to sample the unperturbed air. The MUVE C360 sensor block quickly latches to a proprietary integration dock mounted to the UAS. The FLIR calibration station features the same dock, so the operator can easily connect for routine sensor verification. Sensor readouts are prioritized based on alarm conditions and are displayed real-time on the pilot’s interface in the FLIR VueLink™ app. The MUVE C360 is a time-saving, game-changer for emergency responders, industrial safety officers, and environmental monitoring experts.

ASSESS THE SCENE FROM A SAFE DISTANCE

Before putting the health and safety of your team at risk, fly the C360 into the scene to gather initial assessment of hazards.

SIGNIFICANTLY REDUCE THE TIME TO ACTION

Locate and identify chemical hazards before you go in. Access hard to reach locations. Define a safety perimeter.

FULLY INTEGRATED SITUATIONAL AWARENESS

Get a comprehensive overview of an active scene including visuals and chemical identification.

SPECIFICATIONS

SYSTEM OVERVIEW
Battery Specs
Powered by the UAS
Compatibility
Currently compatible with DJI Matrice 210, V1 and V2, UAS
Sampling & Analysis
Real-time detection
Training Requirements
<30 mins for operator; 4 hours for advanced user
Sensors
CO, Cl₂, O₂, NO₂, H₂S, SO₂, LEL
PID
VOC 10.6 eV (ppm)
Total Weight Payload
1.5 lb (680.39 g) – C360 with dock and snorkel
 
ENVIRONMENTAL
Operating Temp & Humidity
-4 to 122 °F (-20 to 50 °C) 10 to 93%, non-condensing
Storage Temperature
-22 to 158 °F (-30 to 70 °C)
Environmental Protection
IP43-rated
 
PHYSICAL FEATURES
Dimensions (L x W x H)
6.5 x 2.3 x 2.0″ (16.51 x 5.84 x 5.08 cm) – C360 only
Integration Dock
Proprietary quick-connect mount for UAS and FLIR Calibration Station
 
POWER
Cold Start Time
90 seconds from cold start
Input Voltage
24V DJI Matrice 210; 12V FLIR Calibration Station
 
SAMPLING & ANALYSIS
Sample Introduction
Actively pumped via integrated snorkel
Sampling Rate
300 ml/min minimum
 
SENSOR BLOCK TECHNOLOGY
FLIR Calibration Station
Proprietary automatic calibration design, includes tubing and power adaptor
 
SYSTEM INTERFACE
Communication
Remote controller via USB-A accessory (tablet); UAS power port and serial (C360)
Data Storage
Sensor data and flight information logged on tablet
Wireless Range
Determined by the UAS range
Display & Alerts
FLIR VueLink™ application integrated via tablet connected to the UAS remote controller
Lukk meny
×
×

Handlekurv

Velkommen tilbake

Logg inn på din konto